제품소개
OVERVIEW
Applied in Li-ion battery, lead acid battery, nickel-cadmium battery testing and quality control, can realize the integration of charge and discharge data monitoring.
ADVANTAGES
- Support multi-channel charge and discharge curve comparison.
- Support multi-channel parallel.
- Power factor value up to 0.99.
- Anti-reverse connection and data protection.
- Battery discharge and energy feedback efficiency ≥75%.
- Support 10ms working condition simulation test& pulse testing.
- Clamp contact impedance monitoring, avoid safety problems caused by poor contact or oxidation of terminal.
- Supports the logical judgment function of specific parameter assignment.
- Custom mode excel report export function.
FUNCTION TEST
- Cycle life test
- Battery capacity test
- Charge retention test
- Static/dynamic SOC test
- Charging / discharging test
- Temperature characteristic test
- High-speed working condition pulse test
- DCIR test
specification
| Models | HRCDS-5V / 10V | |
| AC parameters | Wiring method | Three-phase five-wire system |
| Power supply voltage | 380±10% VAC | |
| Power supply frequency | 50±5% Hz | |
| Power factor | > 0.99 | |
| Max. power feedback efficiency | ≥ 75% | |
| THD | < 5% | |
| DC parameters | Output current | 30A / 60A / 100A / 150A / 300A |
| Single channel voltage range | 0.8V ~ 5V | |
| Voltage accuracy | ± 0.02% F.S | |
| Voltage resolution | 0.1mV | |
| Current accuracy | ± 0.02% F.S | |
| Current resolution | 0.1mA | |
| Current start response time | 5ms (10% ~ 90% F.S) | |
| Current switching time | 10ms (~90% ~ 90% F.S) | |
| Min. Working Condition Simulation interval | 10ms | |
Upper computer software function | Charging mode | CC, CV, CCCV, CP etc. |
| Discharge mode | CC, CV, CR, CP etc. | |
| Other working mode | Still/Pause, Working condition test, Pulse test, DCIR | |
| Test cut-off condition | Battery voltage, current, time, capacity, temperature | |
| Data export format | Excel, TXT etc. | |
| Data recording interval | 10ms | |
| Editable step | Max. 10000 | |
| Programmable step | Max. 10000 | |
| Nested loop | Max. 10 layers | |
| Software protection | OCP/OVP/UVP/Reverse or wrong connection protection/ Protection for Abnormal consumption | |
| Third-party device integration | Supports linkage of temperature box, MTV/MTS, and pressure sensor | |
| Other parameters | IP grade | IP20 |
| Working temperature | 0°C ~ 40°C | |
| Cooling method | Forced Fan-cooled | |
| Noise | < 75dB | |
| Cabinet size (W*D*H mm) | 600 * 850 * 1030 / 600 * 800 * 1980 | |
