ATE System
OVERVIEW
Applied in Li-ion battery, lead acid battery, nickel-cadmium battery testing and quality control, can realize the integration of charge and discharge data monitoring.
ADVANTAGES
- Support current is divided into three levels 25%, 50%, 100%
- The four-quadrant scheme is optional and can be discharged to negative 6V
- Support multi-channel charge and discharge curve comparison
- Power factor value up to 0.99
- Anti-reverse connection and data protection
- Battery discharge and energy feedback efficiency 75%
- Support 10ms working condition simulation test pulse testing
- Support clamp contact impedance monitoring, avoid safety problems caused by poor contact or oxidation of terminal
- Supports the logical judgment function of specific parameter assignment
FUNCTION TEST
- Cycle life test
- Battery capacity test
- charge retention test
- Static / dynamic SOC test
- Charging / discharging test
- Temperature characteristic test
- High-speed working condition pulse test
- DCIR test
specification
| Models | HRCDS-6V | |
|---|---|---|
| AC parameters | Wiring method | Three-phase five-wire system |
| Power supply voltage | 380±10% VAC | |
| Power supply frequency | 50±5% Hz | |
| Power factor | > 0.99 | |
| Max. power feedback efficiency | ≥ 75% | |
| THD | < 5% | |
| DC parameters | Output current | 100A / 200A / 300A / 500A ····· 1000A |
| Single channel voltage range | 0V~±6V | |
| Voltage accuracy | ± 0.02% F.S | |
| Voltage resolution | 0.1mV | |
| Current accuracy | ± 0.02% F.S Three levels : 25%, 50%, 100% | |
| Current resolution | 0.1mA | |
| Current start response time | 5ms (10%~90% F.S) | |
| Current switching time | 10ms (~90%~90% F.S) | |
| Min. Working Condition Simulation Interval | 10ms | |
| Charging mode | CC, CV, CCCV, CP etc. | |
| Discharge mode | CC, CV, CP, CR etc. | |
| Other working mode | Still, Pause, Working condition test, Pulse test, DCIR | |
| Test cut-off condition | Battery voltage, current, time, capacity, temperature | |
| Software Function | Data export format | Excel, TXT etc. |
| Data recording interval | 10ms | |
| Editable step | Max. 10000 | |
| Programmable step | Max. 10000 | |
| Nested loop | Max. 10 layers | |
| Software protection | OCP/OVP/UVP/Reverse or wrong connection protection/ Protection for abnormal communication | |
| Third-party device integration | Supports linkage of temperature box, MTV/MTS, and pressure sensor | |
| Other parameters | IP grade | IP20 |
| Working temperature | 0℃~40℃ | |
| Cooling method | Forced Fan-cooled | |
| Noise | < 75dB | |
| Cabinet size (W*D*H mm) | 600*850*1030 / 600*800*1980 | |
